2M1 – My first print

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #14913
    richard
    Participant

    Yeah, after a few failed attempts. My bowden tube kept comming loose. I increased print temperature to 230 (from 210) to have less pressure and after 37 hours, it was there 🙂

    PLA – 230 degrees printing temp
    Bed temp – 70
    Layerheight 0.2m
    60mm printing speed.
    25mm first layer speed
    20% grid infill

    printed with support

    #14953
    Forcerouge
    Participant

    Congrat’s
    This one is the longest one to print, good first step 🙂

    #27064
    miko015
    Participant

    Hallo Richard
    Dit you print this with support?

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.