dual print question cura

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #4771
    schawalder
    Participant

    Hello

    When i import dual colour stls and use the command dual-extrusion merge how can i assign wich extruder is printing what part ?
    I have set the colours in the preferences to show extruder 1 in black and extruder 2 in white, corresponding whats actualy in the printer. The colours are right in the preview but when i print its reversed.

    left extruder = extruder 1
    right extruder = extruder 2
    is that right ?

    #5059
    roger uceda
    Moderator

    Hello,
    There is a nice explanation in the support area about how to switch extruders:

    BCN3D Sigma R19 – User Manual


    #8148
    protoscan3d
    Participant

    Hi,
    Is it also possible to to print from the right extruder only in a mono print mode? How do I change the setting

    #8276
    roger uceda
    Moderator

    Hi!
    Just open the gcode with notepad and type T1 in the first line.

    #26787
    goofy.jorge
    Participant

    Hello.
    I usually change the main extruder from T1 to T0, but I have problems printing with T1 and having a material support from the T0, can someone tell me how to configure the gcode to have T1 as main extruder and T0 as material support??

    #27001
    jase
    Participant
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.