The result of continued close collaboration between
BCN3D and leading material manufacturers in order to provide our customers with access to the best performing filament profiles.
All profiles have been created & validated by the Filament Manufactuer.
Check how to load the print profiles to BCN3D Stratos in the link below:
support.bcn3d.com/knowledge/open-filament-network
CMG Tech-X H13 filament is a metal-polymer composite containing more than 90 percent by weight fine metal powder, allowing printing of parts with high quality surface. Parts printed with this filament can be used for cutting tools, dies, moulds, etc.
17-4PH is a heat treatable stainless steel with high strength and corrosion resistance as well as magnetic. CMG Tech-X 17-4PH HMs filament is a high flexibility metal-polymer composite containing more than 90 percent by weight metal powder, allowing printing of parts with high quality surface.
316L is a stainless steel with high corrosion resistance. filament is a high flexibility metal-polymer composite containing more than 90 percent by weight metal powder, allowing printing of parts with high quality surface.
Essentium PA-CF provides exceptional strength, durability, thermal stability, and stiffness that is customary of carbon fiber materials, and is readily printable.
PET-CF has a good balance of stiffness and strength, and when annealed it has temperature resistance of over 155 ̊C, and good chemical resistance for common solvents.
Essentium HTN is a polyamide-based chemistry that has improved mechanical and thermal properties compared to standard nylons. Additionally, it is an easy-to-print, low-warp material that boasts high toughness and wear resistance.
Essentium PCTG is an easy-to-use material with incredible surface finish, superior toughness, and chemical resistance — use it just like PETG.
Essentium PCTG-Z is specially formulated to be ESD safe. It is an easy-to-print material with significantly increased impact strength when compared to PETG. Our ESD materials are non-marring and are engineered to the highest quality standards.
It shows more rubber-like soft touch haptics and better non-slip properties. Furthermore, the material has a low moisture uptake, which allows for printing without pre-drying.
In addition, the good adhesion to ABS and PP allows for printing of multi-material parts.
Ultrafuse TPU 85A has excellent resistance to hydrolysis and good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior.
Ultrafuse rPET (recycled Polyethylene Terephthalate) is made from recycled PET. The recycled material is a food-approved grade. It is environmentally friendly, has excellent 3D printing properties and good mechanical characteristics.
Ultrafuse® PET is widely used to produce food and beverage containers and bottles.
This high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.
Ultrafuse ASA is a high-performance thermoplastic with similar mechanical properties as ABS. Ultrafuse ASA offers additional benefits such as high outdoor weather resistance. The UV resistance, toughness, and rigidity make it an ideal material for 3D-printing applications.
If you’re a filament manufacturer interested in creating compatible profiles for our 3D printers, we’d love to hear from you! Send an email to the address below:
sales@bcn3d.com
"/>
"/>