PA BCN3D Filaments
Wear resistant / Impact resistant / Semi-flexible
PA (Polyamide) is an engineering plastic, characterised by its great resistance to impact and able to work continuously at a temperature of up to 120 ºC for an extended period of time.
Its semi-flexible behaviour derives from a semicrystalline structure, which impart strength and durability, best suited for the most demanding technical applications. A low coefficient of friction allows for a short-term use in contact with moving parts.
Compatibility: Find out the BCN3D printers and filaments compatibility
- Strong and flexible parts
- Structural components exposed to a harsh environment
- Parts demanding high fatigue endurance
- Bearings, nuts, rivets, washers and gears
- Cams, rollers, snap-fit joints and sliding components
- Plugs, connectors, jigs and fixtures
- Electronic covers and tool handles
- Exceptional impact resistance and good strength
- Low friction coefficient
- High abrasion resistance
- Thermal resistance (up to 120ºC)
- Good resistance to oil and alkali
- Strongly hygroscopic
- Thermomechanical properties dependent on environmental humidity
Datasheets:Download safety and technical data sheets
Use support materials to expand your 3D printing horizons
Our hosts and 3D printing specialists Álvaro and Jess give us the lowdown on all the different benefits that arise from using support materials, and all the different ways in which they can be implemented.
Your Extensive Guide to the Properties of 3D Printing FFF Filaments
This white paper dives deep into physico-mechanical properties and impact, heat and water resistances, by evaluating the performance of every material in the BCN3D portfolio.
Materials for 3D printing & In-depth on fibre-filled
Which is the strongest 3D printing material? And… is stronger always better? In this webinar, Materials Engineer Dario Destro will walk you through the different 3D printing filament types currently available in the market and their properties, with a special emphasis on fiber-filled materials.
NGNY Devices: Thousands in savings on end-use parts thanks to 3D printing
Incorporating in-house 3D printing at the engineering and fabrication workflows of end-use parts for their automated machines is saving NGNY over 40,000€ a year, while significantly accelerating their processes and facilitating customization from beginning to end.
BCN3D Graphic PA Filament
How to print
For BCN3D Stratos users:
Get a proper printing profile for PA using the ones integrated into the BCN3D Stratos. Download the latest version of BCN3D Stratos.
To ensure good bed adhesion use Magigoo PA.
- Store it in an airtight container with desiccant.
- Dry filament before printing.Place it in an oven or in a dehydrator at 50ºC for 6 to 8 hours
- Enclosure is required for BCN3D Sigma and Sigmax printers.
Product design end-use partsPA provided the high fatigue endurance, durability, and exceptional impact resistance needed for this protector for the fork guard front.
High resistance to wearPA is ideal for assembling moving parts, thanks to its low coefficient of friction and durability.
High fatigue resistancePA is ideal for strong and flexible parts subject to cyclic loads that require high fatigue resistance.